{"id":2832,"date":"2017-10-02T07:33:39","date_gmt":"2017-10-02T07:33:39","guid":{"rendered":"http:\/\/manningkrull.com\/manningmakesstuff\/?p=2832"},"modified":"2018-09-11T12:22:38","modified_gmt":"2018-09-11T12:22:38","slug":"haunted-book-paper-mache-sculpture-part-2","status":"publish","type":"post","link":"https:\/\/manningkrull.com\/manningmakesstuff\/haunted-book-paper-mache-sculpture-part-2\/","title":{"rendered":"Paper mach\u00e9 Necronomicon sculpture — part 2"},"content":{"rendered":"

This is part two of two of my paper mach\u00e9 demonic book project. See part one here<\/a>.<\/p>\n

<\/p>\n

Making the 3d “BOO!” logo<\/h2>\n

To create the “BOO!” logo in the mouth, I started out by printing several copies of the logo (designed by my friend Jon Morris) at the actual size; I’d planned out my sketch for the face along with the logo in Photoshop so I’d be able to plan all of these parts to fit together the way I wanted. <\/p>\n

<\/p>\n

The logo is three layers of material: there’s the background part that includes the outside stroke, then the letters themselves, and the last part is the little ghost\/skull faces that make up the holes in the letters. <\/p>\n

\"Necronomicon<\/a><\/p>\n

I made the background layer out of 3\/8″ foam board; I cut out one of my printouts, traced it onto the foam board with a pen, cut that out very carefully with my X-acto knife, and then covered it with small pieces of packing tape on both sides to prevent warping, and then I added one layer of very tiny pieces of papier mach\u00e9.<\/p>\n

\"Haunted<\/a><\/p>\n

\r\n